7 PC FOREST STEEL TOOL WORKS HAND WOODWORKING FLAT WOOD CHISEL TOOL SET IN CASE KIT NO. 41007

Best Price 7 PC FOREST STEEL TOOL WORKS HAND WOODWORKING FLAT WOOD CHISEL TOOL SET IN CASE KIT NO. 41007

7 PC FOREST STEEL TOOL WORKS HAND WOODWORKING FLAT WOOD CHISEL TOOL SET IN CASE KIT NO. 41007 Overview

7 piece Forest Steel Works wood chisel set. Tool details:? Sizes include: 1/4", 3/8", 1/2", 5/8", 3/4", 1" and 1 1/4" ? Indestructible polypropylene handles to absorb mallet blows ? Beveled edge blades ? Precision ground for precise control ? Hardened blade body to hold sharp edges longer for smooth cutting and chipping ? Square handles to prevent rolling ? Rounded corners for comfortable grip ? Protective plastic edge covers protect tools edge when not in use ? Wooden storage case keeps chisels organized and at hand

Available at Amazon Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Sep 18, 2012 20:17:51

Tags : Band Saws Woodworking Tools home improvement Cordless Nailers Fences Accessories Dust Collectors & Air Cleaners

Cleaving Wood Part 2 Or production A Chair From A Tree Without Electricity Or machine Tools, Part 5

In the tool chest I have a range of antique tools which is allinclusive enough for me to be able to take squared off, straight pieces of wood, make them into chair components and then make them into a chair. I will discuss the contents of the chest in a combine of chapters, but the problem at the occasion is how to produce the straight pieces of wood! We take this for granted just visit the timber yard or run a piece over the planer and it's done. In this project, where I have left modern conveniences behind, this is the most difficult bit. I've reduced the tree to manageable pieces and taken them back to the shed on a wheelbarrow. What next?

I have to start drying this wood now as it is still full of sap and must be given time to lose its moisture, shrink and move. How long does this take? It depends how thick it is and where it is kept while drying. There is a rule of thumb, which says to allow one year for every inch of thickness.

Chisels Hand Tools

Some of these 'billets' are very thick, colse to 120mm or more at their thickest. I can't wait for ever - I want to be sitting on this chair well before the end of the year - and there is something else to take into account at this stage: Timber is easier to cut and shape when it is still 'green'.

Cleaving Wood Part 2 Or production A Chair From A Tree Without Electricity Or machine Tools, Part 5

Best Price Two Cherries 515-8575 5-Piece Small Wood Carving Tool Set with Leather Pouch

Two Cherries 515-8575 5-Piece Small Wood Carving Tool Set with Leather Pouch Feature

• Versatile Two Cherries 5-Piece small wood carving tool set with polished German hand-forged blades
• Great for small work, or for taking your carving hobby on the road
• Small octagon handles fit comfortably in the hand, and the balance of handle to blade is perfect
• Kit includes 6-millimeter straight chisel ,6-millimeter skew, 4-millimeter and 8-millimeter gouges, 4-millimeter V-tool, and leather case
• Approximately 4-1/4-inch overall length, with 2-1/4-inch blades

Two Cherries 515-8575 5-Piece Small Wood Carving Tool Set with Leather Pouch Overview

The Two Cherries 5-Piece Small Wood Carving Tool Set comes with an attractive leather pouch and features polished German hand-forged blades that are heat-treated to stay sharp longer. The set includes a 6mm straight chisel, a 6mm skew, 4mm and 8mm gouges, and a 4mm V-tool. All the included tools feature comfortable octagon-shaped wooden handles.

What's in the Box
6mm straight chisel, 6mm skew, 4mm and 8mm gouges, 4mm V-tool, and leather case.

Available at Amazon Check Price Now!

Related Products

• FINGER GUARD
• The Complete Book of Woodcarving: Everything You Need to Know to Master the Craft
• Flexcut SLIPSTROP
• LEATHER THUMB GUARD LARGE
• The Beginner's Handbook of Woodcarving: With Project Patterns for Line Carving, Relief Carving, Carving in the Round, and Bird Carving

Customer Reviews

*** Product Information and Prices Stored: Sep 07, 2012 06:00:06

First I intend to slice, split and saw out these components, slightly large to allow for shrinkage and movement, and air dry them for a few months. I'll check them for moisture content. Then, stack them in the house somewhere for a month or so to put in order them for central heating and domesticity.

One thing that is well worth doing while cut timber is drying in the yard is to paint the ends. There is a liquid wax preparation which we use for this job but you can just as well slap on a coat of oil-based paint. This is to prevent end splits, which can invent while the wood dries out. By concentrating on using quarter sawn components, I am using wood that is stable, that is, it shouldn't distort in drying. The first job was to place a pair of the "manageable pieces" side by side on the ground, forming a notch for holding the other pieces while splitting and working on them. The subdivision was an additional one job for the wedges, something that was turning out to be relatively easy.

I particularly want to get the back legs roughed out at this stage as they are the longest components.

I opt pieces that are reasonably straight grained, because they will be easier to work, but take pieces from a bend in the tree because they correspond with the shape of the template - less work when it comes to sawing them. I wonder if the shape of the back legs; typical of this chair design, industrialized from similar thinking long ago. Look at my photos and you'll see what I mean. This is a very strong chair anyway but if the back legs are shaped to ensue the grain of the tree they will be stronger still, as well as production the job easier. By the way, I don't think this invent goes back a mere combine of hundred years, I think it is a synthesis of many chairs appealing many unknown makers.

My respect for the ancients was about to growth as I began to tackle the adze.
I wanted to flatten one outside of each piece and I sharpened up the adze. I knew by now that heroic feats of sawing were on the program if I was going to get components to regular thicknesses, but using a flattened outside as datum was important in order to judge where to saw.

I had never used an adze before and if I'd been asked what would be the most thorough verb for 'adzing', I would have guessed swing - unmistakably you 'swing' an adze?
Now I would say 'chip' and I would also say that 'adzemen' (what else would they be called?) have a extra kind of strength. Try chipping away for half an hour and you'll see what I mean. I intend to try more of it - especially the short handled adze for bowl production etc - but not until these components are sawn.

I concept I would try a accepted rip saw for ripping this down. There's a rip saw in the tool chest and I have one in my own toolbox but I haven't done much serious ripping until now. Both of these saws had been sent away for sharpening, but neither was much use for this kind of 'extreme' sawing; one was determined to cut squint and the other had a incommunicable 'stop' in the middle of it's blade beyond which it would not cut.
I decided there and then to do my own sharpening in time to come - Mr Wake, the original tool chest owner, had done his own sharpening; the setting tools and files were in the box.

So I tried a bow saw. See the movie clips on the Wood-shop website - Mr Wake must have had a bow saw as there is a blade for a small bow saw in the tool chest. I found that the bow saw was inclined to leave the straight and narrow as well...

Wedges are important for holding the kerf from closing. As usual with hand tools the main problem is with holding the stock while cutting it. I had to chisel out notches for the clamps to give them a good purchase. I found that clamping it to the side of an old gate; two clamps, one at the top and one at ground level worked better than I had expected.

It was the "Great American" Disston which saved the day. I sharpened and waxed it and away we went. This is a cross-cut saw, but cross-cut saws can be used for ripping when the reverse is not the case.

One thing that is worth saying in defence of the accepted rip saws is that they cut most efficiently when the teeth are at 45 degrees to the outside of the material, so the stock should be lying horizontally for the spoton sawing angle. I found it most convenient to have the stock standing vertically and this fitted in fine with the Disston.

I ready far more wood for components than important in order to allow for wastage and experimentation later on. I piled the materials up on battens under a makeshift roof to safe them from rain and sun for a few months. The roof was made generally from old pallets - driftwood, of course.

Cleaving Wood Part 2 Or production A Chair From A Tree Without Electricity Or machine Tools, Part 5

Visit : home improvement Cordless Nailers educational toys

everything You Need to Know About Craving CraftS

Handicrafts are commonly produced by using the hands. Meanwhile, the craving craft is an item that is carved on some materials, such as stone, wood, metal, or ivory. However, to carve the materials, you need a persistence, skill, and artistic sense.

Meanwhile, the wood carving craft is a carving craft that is applied on materials made of wood. In this case, carving is a technique of development materials come to be special and unique. To carve the materials, habitancy commonly use tools like carving chisels.

Chisels Hand Tools

Carving art is a literary work of optical forms. In its processing, this art has kruwikan characteristic with a harmonious arrangement, so it is no wonder that it has aesthetic value. Carving art itself is commonly applied in any materials that include wood, metal, ivory, stone and other materials. Meanwhile, the forms of this art are the stylization of natural forms, together with plants, animals, clouds, water, humans, and many more.

everything You Need to Know About Craving CraftS

Best Price Armstrong 70-000 Punch and Chisel Holder

Armstrong 70-000 Punch and Chisel Holder Feature

• Tri-oval shaped handle conforms to the hand to increase comfort and reduce operator fatique
• Safety warning is prominently marked on tool
• "V" shaped head effectively traps the punch or chisel securely, reducing risk of injury
• Proudly manufactured in the USA
• Lifetime Warranty

Armstrong 70-000 Punch and Chisel Holder Overview

Armstrong Industrial Hand Tools have a heritage of Made in the USA since four brothers founded the company in 1890. This Armstrong brand punch/chisel holder accepts up to 1-1/16" hex stock and prevents against hand injury. Length contracted is 7.5 inches while length expanded is 8.75 inches.

Available at Amazon Check Price Now!

Related Products

• Sheffield Tools 58780 Hook And Pick Set, 4 Piece

Customer Reviews

*** Product Information and Prices Stored: Sep 04, 2012 13:45:05

Along the time, the carving art is applied on varied kinds of furniture and attractive or artistic items that are made of wood, metal, porcelain, gold, ivory, woven fabrics, and many more.

One of the examples of carving art is Bali craft. Bali craft is one of crafts that is well known for its uniqueness. Indeed, Bali has a wide range of handicraft products, such as wooden carving sculptures, souvenirs, Bali scrubs, aromatherapy, bags, shoes and Bali sandals. With the existence of art and culture in Bali, Bali handicrafts have high artistic value and high flavor to be used as adornment for home, park, hotel, and office.

In choosing crafts, you should try to settle on high capability products. Do not just look at the price, while the examples of products have a capability that is not guaranteed. You can say that the products are fine if you see the manufacturing process of the products.

everything You Need to Know About Craving CraftS

My Links : Band Saws Woodworking Tools home improvement Multitools Hand Tools Tile & Masonry Saws Woodworking Tools Combo Packs Air Tools

yield Razor-Sharp Chisels and Plane Blades With Sandpaper

For years, no matter what method I used, my sharpening efforts were a disappointment. Then I tried high-quality sandpaper as the sharpening medium, used with an angle jig. To my surprise and delight, the process proved to be remarkably quick, easy, and effective. Indeed, it now takes less than two minutes on median to grind a dull plane blade or bench chisel with a exquisite bevel angle every time.

Sandpaper sharpening has been nearby for a long time. As the name suggests, it uses sandpaper as the sharpening medium, rather than customary oil-stones or water-stones. The paper is glued temporarily to a flat surface, such as the top of a tablesaw or joiner, or more generally of late, a piece of glass.

Chisels Hand Tools

I now use a commercially ready jig for most of my honing, but for a long time my jig was shopmade. I still use the shopmade jig when I want to add a shallow back-bevel to the flat side of a plane blade. The industrial jig will furnish a back bevel, but it's puny to an angle that's not to my taste.

yield Razor-Sharp Chisels and Plane Blades With Sandpaper

Best Price General Tools 809 Chisel/Plane Blade Sharpener

General Tools 809 Chisel/Plane Blade Sharpener Feature

• Adjustable
• Folds for storage

General Tools 809 Chisel/Plane Blade Sharpener Overview

General Tools chisel and plane blade sharpening guide allows angles to be set with the printed scale, a protractor or by eye. The adjusting knob determines the bend in the guides body and the angle of sharpening at the tools front edge. Spring tensioned clamp holds tools up to 2-5/8" wide. Two-wheeled rear roller moves in a straight line during use and will not wander sideways like other guides. Lightweight sharpener is made of high-impact Lexan.

Available at Amazon Check Price Now!

Related Products

• Robert Larson 800-1800 Honing Guide
• Woodstock SteeleX D1130 1000 Grit and 6000 Grit Japanese Waterstone
• DMT D6EF 6-Inch Dia-Sharp Double-Sided Extra-Fine/Fine Bench Stone
• DMT D6CX 6-inch Dia-Sharp Double-Sided Coarse/Extra-Coarse Bench Stone
• DIAMOND SHARPENING STONE - hone block - 2" x 6" double sided FINE + MEDIUM

Customer Reviews

*** Product Information and Prices Stored: Aug 24, 2012 08:45:06

After switching to sandpaper sharpening, I experimented until I found the technique that worked best. I now use high-quality sandpaper that has a remarkably consistent grit size and an adhesive backing that secures it solidly to the glass. That way, as I sharpen, the paper doesn't push up in front of the cutting edge and convert the sharpening angle. And I add three microbevels, which gets me through the three successive grits of sandpaper more quickly.

The sandpaper must be mounted to a flat surface. I use thorough window glass. It's inexpensive, ready at any glass shop, and more than flat enough. Because my sharpening policy requires three distinct sandpaper grits, I use three pieces of glass, each measuring 5mm thick by 6 in. Wide by 16 in. Long. A glass shop will cut them to size for you. For safety's sake, take a few minutes when you get them home to flat the sharp edges with sandpaper.

To expand and safe the glass, glue it to a backer board. I use 4-in. Thick hardboard (Masonite), but plywood also works. I use a glue called Weldbond, but I think that any glue that bonds wood and glass will work. Apply a thin coat of glue to each mating surface, then place the glass on the backer. A few pieces of masking tape prevent the glass from sliding, and a stack of books on top holds it down.

The most important part of my ideas is high-quality adhesive-backed sandpaper. I use microfinishing sheet abrasives made by 3M, compared to quarterly sandpaper, the grits on this 3M stock are more uniform in size. That means you are less likely to get unwanted deeper scratches from an occasional oversized grit in your paper. Plus, because the sandpaper mounts firmly on glass, the abrasive stays flat. I use three grits-15 micron, 5 micron, and 0.3 micron-one for each piece of glass.

It's important to apply the paper carefully. Any dirt or air bubble can leave a bump, and even a tiny bump can nick the edge of a tool or catch an edge while sharpening and tear the paper. Before adding the paper, wash the glass with soap and water to remove odd pieces of dirt or sawdust.

Cut the sheet abrasive in half lengthwise and remove the backing paper. Wash your hands with just a puny soap on them (not too wet) and rub your hand on the glass to dampen the surface. If you tilt the glass and water runs off, it is too wet. Add the paper carefully to avoid trapping air bubbles in the middle of the glass and the paper. Place one end of the paper on one end of the glass, lowering the paper until you reach the other end. The soapy water will prevent the adhesive backing from adhering immediately, so you can slide the paper nearby until it's centered. The water will dry through the paper in short order. No matter how small they might be, roll or push out any air bubbles.

Because I use microbevels, I must hold the cutting edge at a consistent angle every time. I've long been partial to my shopmade jig, but of late, I've also learned to like the Veritas Mk.Ii jig. The Mk.U accepts most plane blades and bench chisels, and allows me to manufacture three microbevels quickly.

Before you start honing, grind a fresh 25° customary bevel on the blade. When grinding, make sure the edge ends up quadrate to the chisel or blade. After the edge is ground, set the Mk.Ii to 30° and mount the blade or chisel. Make sure the knob on the eccentric roller is in the 12 o'clock position. Then, put a puny baby oil or mineral oil on the 15-micron abrasive. As you sharpen, the steel that's removed will end up as tiny filings. You'll want sufficient oil to float the filings out of the abrasive so that the blade can push them along the sheet for a natural cleaning action. When you're finished, you can clean up the excess oil with a paper towel.

To start, rest the edge of the blade in the oil and pull back first (this prevents paper rips if there is a incommunicable bump or bubble at the edge), then forward and backward a few times with light pressure. Keep the roller of the jig off the sandpaper. Check the bevel after no more than a join dozen strokes. You should see a new bevel forming at the edge. Typically, it need be only about one-tenth the width of the 250 customary bevel.

Now, convert the angle of the jig from 30° to roughly 31°. That's done plainly by turning the knob on the jig's eccentric roller to the 3 o'clock position. Repeat the honing steps with the S-micron grit. I normally spend no more than 30 seconds at that grit.

Finally, convert the angle of the jig from 31 ° to roughly 32° by turning the eccentric roller knob to about the 6 o'clock position. Repeat the honing process with the 0.3-micron grit. You should need only a dozen or so strokes to add this final microbevel.

A t this point, you will have a burr o n the back of the blade or chisel. To remove the burr, flip the jig and hold the back side of the blade or chisel flat against the 0.3-micron paper. Slide the blade back and forth a few times until the burr breaks free.

That's it. The edge will be razor sharp and ready to go to work. When it begins to dull, place it back in the jig and redone it, always working through all three grits. If your jig is already set up, you can faultless a rehoning in less than two minutes.

yield Razor-Sharp Chisels and Plane Blades With Sandpaper

My Links : Band Saws Woodworking Tools home improvement Scanners & Testers Hand Tools Drill Bit Sets Accessories Spot welding Equipment Power Tools

SK Hand Tools 6029 29-Piece Punch and Chisel Set

Best Price SK Hand Tools 6029 29-Piece Punch and Chisel Set

SK Hand Tools 6029 29-Piece Punch and Chisel Set Feature

• 29-piece punch and chisel set removes loosened pins from assemblies
• Flat chisels resist splitting and mushrooming
• Forged from premium alloy steel
• Includes 7 pin punches, 6 starter punches, 4 center punches, 7 flat chisels, 2 cape chisels, 1 half round nose chisel, and 2 diamond point chisels
• Full lifetime warranty

SK Hand Tools 6029 29-Piece Punch and Chisel Set Overview

SKT6029 Features: -Strength and precision.-Featuring 7 different types of punch and chisels for a variety of uses.-Packaged in a roll.-Made in the U.S.A..-29 Piece Punch and Chisel Set. Includes: -Lifetime warranty20 piece punch and chisel set is made in the U.S.A. and hot forged from alloy steel for maximum strength. Each punch is hardened and tempered for maximum durability, and each is individually black oxided, ground and polished to a smooth metallic shine and corrosion resistance. Flat chisels are designed and tempered to resist splitting and mushrooming. Set includes: pin punches - 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"; starter punches - 3/32", 1/8", 5/32", 3/16", 1/4", 5/16"; center punches - 1/4", 5/16", 3/8", 1/2"; flat chisels - 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"; cape chisels - 1/4", 5/16"; half round nose chisel - 5/16"; diamond point chisels - 5/16", 3/8".. Warranty: -Sets & Kits do not have warranty/ see individual pcs for details.

SK Hand Tools 6029 29-Piece Punch and Chisel Set Specifications

The SK Hand Tools 29-Piece Punch and Chisel Set removes loosened pins from assemblies. It features seven different types of punch and chisel for a variety of uses. Forged in the U.S.A. from premium alloy steel, these punches and chisels are hardened and tempered for maximum strength and durability. They are individually ground, polished and coated in a black oxide for a smooth finish and corrosion resistance. The flat chisels resist splitting and mushrooming. This set is packaged in a tough Condura roll for safe and easy storage. It comes with a lifetime warranty.

What's in the Box
3/32-, 1/8-, 5/32-, 3/16-, 1/4-, 5/16-, and 3/8-inch pin punches; 3/32-, 1/8-, 5/32-, 3/16-, 1/4-, and 5/16-inch starter punches; 1/4-, 5/16-, 3/8-, and 1/2-inch center punch; 1/4-, 5/16-, 3/8-, 1/2-, 5/8-, 3/4-, and 7/8-inch flat chisels; 1/4- and 5/16-inch cape chisels; 5/16-inch half round nose chisel; 5/16- and 3/8-inch diamond point chisels.

Available at Amazon Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Aug 22, 2012 11:16:34

Recommend : Band Saws Woodworking Tools home improvement Saws Air Tools Impact Wrenches Band Saws Woodworking Tools

Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard

Best Price Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard

Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard Feature

• Durable bull point that cuts fast, and lasts long
• Ideal for cutting through and breaking up concrete
• Limited Lifetime Warranty

Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard Overview

2493-6064 Features: -Durable bull point that cuts fast, and lasts long.-Ideal for cutting through and breaking up concrete.-3/4'' cutting edge.-Carded. Dimensions: -12'' length.

Available at Amazon Check Price Now!

Related Products

• Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard
• Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard
• Stanley 54-022 FatMax AntiVibe Brick Hammer
• Stanley 16-298 3 Piece Cold Chisel Kit
• Stanley 55-515 12-inch Wonderbar Pry Bar

Customer Reviews

*** Product Information and Prices Stored: Aug 14, 2012 21:45:03

Visit : Band Saws Woodworking Tools Ratchet Wrenches Air Tools

Psychic surgical operation and Reiki curative

Reiki is a polite but grand form of healing. When Psychic surgical operation is added to it, Reiki turns into "Miracle Healing".

There are basically two different forms of Psychic Surgery

Chisels Hand Tools

1- The one practised by most Western Psychic Surgeons

Psychic surgical operation and Reiki curative

Best Price Stanley 16-299 12 Piece Punch & Chisel Kit

Stanley 16-299 12 Piece Punch & Chisel Kit Feature

• Accessible packaging enables the customer to easily evalulate products in store
• Limited Lifetime Warranty

Stanley 16-299 12 Piece Punch & Chisel Kit Overview

2494-6147 Features: -Punch and chisel set.-12 per card. Includes: -Kit includes one 1/16'', one 1/8'', two 5/32'', one 1/4'', one 5/16'', one 3/32'', one 5/16'', and one 1/4'' punches, one 3/8'', one 1/2'' and one 5/8'' chisels.

Available at Amazon Check Price Now!

Related Products

• Stanley 58-930 Cushion Grip Nail Set, 3-Piece
• Stanley 55-515 12-inch Wonderbar Pry Bar
• TEKTON 3080 Fiberglass Ball Pein Hammer Set, 4-Piece
• Stanley 16-970 FatMax Short Blade Chisel Set, 3-Piece
• Stanley 85-753 22 Piece Long Arm SAE & Metric Hex Key Set

Customer Reviews

*** Product Information and Prices Stored: Aug 05, 2012 20:30:06

2- The one practised by gifted healers such as the celebrated Filipino Psychic Surgeons. These are also known as "Bare Hand Surgeons"

Western Psychic surgical operation and Reiki explained

All Western Psychic surgical operation I have witnessed or heard of in the Uk is bloodless. The surgeon works on the etheric body (the aura). He does not perforate the skin or the bones and does not take off corporal matters from within the body.

In my Reiki Masters course, I teach this form of Psychic surgical operation based on Reiki and on my sense gained from Filipino Bare Hand Surgeons. I have been visiting these surgeons in the Philippines since 1997. I am now able to combine the sense of both Western and Asian forms of surgical operation into a very grand method of healing.

The method I teach is simple:

1- You use the grand Reiki Usui's devotee emblem and the Power emblem on both hands to give you energy.

2- You may want to safe yourself with the Power emblem by drawing it in front of you

3- Say a prayer or ask to your guide(s) to channel you for this Psychic surgical operation operation.

4- Elongate your fingers by pulling on them and extending them by a few inches whilst inhaling and manufacture a "wind" noise between your lips

5- Draw an Usui's devotee emblem on your finger's extension

6- Ask what is or intuitively "see" the problem inside your client's body - if you cannot see, ask the client to spin the problem with questions such as: Where is it? what shape? What colour? What consistence? etc.. Until you have a exquisite view of what the problem is

7- operate using your extended fingers: visualise these extensions going inside the client's body and removing blockages, tumours, draining pus, cleaning etc.. You may, for this rehearsal use whatever etheric tool you need such as lasers, knife, chisel, hammer, magic fluid etc..

8- Talk to your client throughout the surgery. Keep request them what they feel and tell them what you feel yourself.

9- Keep the performance going until you feel you have wholly removed, cleaned or unblocked the problem

To make sure this is working, you must be convinced that the surgical operation will work otherwise you are wasting your time. You must visualise without doubting and "know" the person is going to get better. Keep repeating to yourself many times something like "the tumour is melting" or "this xxxx is disappearing" and believe it.

The above has brought miracle cures to many of my clients. Having said this, unless the cause of a problem is removed, the problem may keep coming back. This is the topic of someone else one of my articles on "Cancer - Causes of disease".

Bare Hand Surgery, as practised in the Philippines, explained

Basically, a Bare Hand Surgeon enters a person's body using his / her Bare Hands and manually removes diseased or dead tissues, tumours, power blockages, calcium deposits and other matters that should not be there. This is done without inflicting any pain, coming out without leaving any graphic marks or scars.

I have personally been visiting Bare Hand Surgeons with groups in the Philippines since 1997 and I have witnessed thousands of these surgeries. I have worked with over 30 surgeons but I have only kept 3 which, I believe, are genuine. All the others were either cheating or were unethical.

Psychic surgical operation is impossible some say? Yes, but only agreeing to contemporary scientific standards. I do not understand how telepathy works but I accept it. The Fbi and Scotland Yard use mediums to trace criminals and the success rate with some medium is high. This is not very scientific but it works. "Remote viewers" have been shown many times on Tv and it was proved that these people could see through the eyes of someone else person who was miles away. How does this all work? It does not matter. What is foremost is that it works.

"What conditions can be treated?

The following only represents a few examples of conditions I have personally seen treated by the Bare Hand Surgeons I have visited:

* several years ago, Bare Hand surgical operation was successfully performed on a friend of mine suffering from Parkinson's disease. This successfully stopped the progression of the disease for many years (this gentleman never worked on the cause and the problem finally came back).

* Recently, a Psychic surgeon cleared "growths" from colse to my prostate. He then left a Kleenex tissue inside my body overnight to prevent the seeping of blood back in the testicles (I could feel the tissue by pressing on the point where it was inserted).

* I had a 12" tumour removed from my large intestines. I was eating a normal meal half an hour latter.

* A member of our group had her ovaries and fallopian tubes "cleaned" .

* The eyes of a person suffering from cataract where "cleaned"

* One member of our group had growths that were attached to her spine removed. This lady had had problems thoughprovoking her head fully and had suffered from persisting pains in her shoulders for many years. The instant revising to the head was clear and her shoulder pains have now wholly disappeared. Months of corporal therapy had previously had very minute impact.

* I witnessed two different Bare Hand Surgeons successfully take off deep brain tumours from two different patients.

* someone else Bare Hand Surgeon cleared a "goitre" from a gentleman's throat

* One surgeon removed numerous tumours from a patient's reproductive organs who was suffering from final cancer. This person is now feeling alright

* One surgeon cleaned the arteries of a outpatient colse to his heart

etc.. Etc.. The list is too long to mention.

Basically, Bare Hand Surgeons do not specialise in any exact disease. They work with "energy" on everything presented to them (as long as their guides allow it).

Is there any warrant of success?

There is no implied or explicit warrant by ethical healers or myself for this form of Alternative Therapies.

Is Bare Hand surgical operation fake or real?

Each time a film is shown on Bare Hand Surgery, it portrays the course as being some act of magic. The thoughprovoking thing is that the people who perform the magic, or those who ask them to perform it, have never been to the Philippines and have never witnessed the surgical operation themselves. They ridicule something they have never seen because they don't understand it.

Testing the Bare Hand Surgery

To test a "surgeons" who claims to be a Bare Hand Surgeon, I set up the following test for them.

1- They must work with short sleeve shirts

2- They have to work on a couch or bed I have first inspected to make sure nothing was hidden

3- They must show me their hands just before the surgical operation and start operating without touching anything

If they can still originate blood and matters from inside the body, they have past my first test

The other tests come with the working on clients over a duration of time and the saving of the client.

I have been personally allowed to feel a person's tumour rolling under my fingers before the surgery. After the surgical operation was performed, the tumour was no longer there. Other members of my group felt the same.

Finally, when I take a group to the Philippines, my students are able to film the surgery. The surgeon is then surrounded by camera from the right, the left, the front, the back and sometimes even from above if somebody dares climb on a chair to film. Since 1997, and thousands of surgical operation later, nobody in my group has ever caught one of the surgeon I visit cheating.

To me, a few Bare Hand Surgeons in the Philippines are genuine and many are fake.

Psychic surgical operation and Reiki curative

Visit : home improvement Band Saws Woodworking Tools Sand Blasters Hammer Drills Power Tools

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set

Best Price Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set Feature

• Black polypropylene handle resists deformation. Includes: 16-153, 16-155, 16-157
• Limited Lifetime Warranty
• Heat tempered steel blades, lacquer-coated to prevent rust
• Blades uniformly hardened for full length use

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set Overview

"STANLEY" WOOD CHISEL SET CONTAIN3 Piece Wood Chisel Set Contains 1/2" (12MM), 3/4" (18MM) & 1" (25MM) ChiselsFeatures Full SizeShock Absorbing Handles With A No Roll FeatureDurable Precision Ground Cutting EdgesHeat Tempered Steel BladesLacquer Coated To Resist RustBolster Blade Washer To Distribute LoadAdded For StrengthOverall Length Of Chisels Is 7-3/4" (199MM)Carded

Available at Amazon Check Price Now!

Related Products

• Stanley 55-515 12-inch Wonderbar Pry Bar
• Swanson Tool SO101 7-inch Speed Square
• Stanley 58-930 Cushion Grip Nail Set, 3-Piece
• Stanley 45-300 Aluminum Carpenters Square
• Empire Level E250 12-Inch Heavy Duty Professional Combination Square w/Etched Stainless Steel Blade and True BlueR Vial

Customer Reviews

*** Product Information and Prices Stored: Jul 09, 2012 00:00:07

Tags : Band Saws Woodworking Tools home improvement Screwdrivers Air Tools Measuring & Layout Tools Hand Tools

Carving a Stone House Sign

If you would like to try carving your own stone house sign and you have no old experience, you may find some of the tips below will help.
First choose a favorable stone, unless you are experienced at carving, select a soft stone such as Bath stone.

You will need at least one good chisel, a quarter inch steel splitter will do the job. A steel club hammer, as small as possible, a right edge or quadrilateral and a scriber, a sharpened masonry nail will do, and a Riffle file would also be very handy.
A riffle file is a small metal rasp with two shaped heads. If you don't have a riffle, use a small fine rasp.

Chisels Hand Tools

Tips:

Carving a Stone House Sign

Best Price SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch

SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Feature

• Eleven 9-Inch chisels, hardened high-carbon steel blades with rubberized soft-grip handles
• Blade styles include wide and narrow flat, rounded, concave, corner, straight and offset
• Dual-grit aluminum oxide whetstone plus round, flat and triangular silicon carbide sharpening stones
• Rugged poly-canvas case with elastic pockets to keep organized and protected; 12-Inch hardwood striker

SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Overview

16Pc Professional Quality Wood Carving Chisel Set 11- 8.5-Inch High Carbon Steel Wood Chisels with High Impact Plastic Handles 3- 6 by 1/2-Inch Silicon Carbide Round, 3 Square, Rectangular Stone 6-Inch Combination Sharpening Stone Wooden Sticker Heavy Duty Carrying Pouch Included.

Available at Amazon Check Price Now!

Related Products

• FINGER GUARD
• SE 7718WC Professional Wood Carving Chils with Cloth Pouch-18 Piece
• The Beginner's Handbook of Woodcarving: With Project Patterns for Line Carving, Relief Carving, Carving in the Round, and Bird Carving
• LEATHER THUMB GUARD MEDIUM
• LEATHER THUMB GUARD LARGE

Customer Reviews

*** Product Information and Prices Stored: Jul 05, 2012 03:45:06

Search in your local road market for second hand tools, it may save you money.

If you find a small club hammer with a short cope and a hollow worn into the side of the head, rejoice, you have found an former stone carvers hammer!

Cut down the cope of an commonplace club hammer to about six inches, this will make it much easier to cope and control.
When using the hammer with a chisel, strike with the side of the head, this will help you keep greater operate of the both the hammer and the chisel, use the thumb pressed against the head or cope to help keep the hammer steady.

To hold the chisel correctly first lay the chisel across the lowest joints of the fingers and fold the fingers over to grip the chisel, do not clench your fist, the thumb rests on the shaft of the chisel to help with control.
Keep both your elbows tight into your side and not waiving around in space, this will help with control, and also forestall shoulder ache. If you find this difficult, try to hold a pencil under your armpit while working!

To make a small scriber or point try using a sharpened Oboe masonry nail.

I advise trying to carve out a sign in relief, that is where the carving stands proud of the background, rather like a cameo. Leave a raised border around the edge to sell out the whole of work.
Choose a style of font that suits your house or create of house sign. However, I advise not to use a font with thin or narrow sections, as these can be brittle when carving. You could consist of a motif , for instance a flower or leaf pattern but do keep it uncomplicated for your first effort.

Mark out the layout of your house sign or whole in pencil. When you are happy about the create use the scriber and right edge to scribe in deeply all of the right lines in the design, even the right lines on the lettering or numbers, then pencil in the scribed lines. When you are carving you will find the edge of the chisel can be lodged into the scribed lines for greater accuracy.

One of the most difficult problems to overcome is how to hold the piece of work steady while carving. To solve this qoute fix the sign to a larger slab of stone or paving slab with plaster of Paris. When the job is done plainly tap a chisel into joint between the sign and the backing, it will just pop off!

The first task with all stone work is to take off the waste material. Keep away from the lettering or border, take off as much of the waste as inherent before tackling the prominent bits. Approach the edges of the letters gradually, don't try to do too much too quickly. Carving stone is verily a process of shaving off layers until the required shape is achieved.

To halt off, sand down with a base grit wet and dry polisher paper, used dry not wet.

Good luck, and please let me know how you get on, you can sense me straight through my website

Carving a Stone House Sign

Friends Link : Band Saws Woodworking Tools home improvement Hammer Drills Power Tools Rotary Hammers Lathes

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

Best Price PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece Feature

• Ideal kit for turning small pens, spindles, bowls and larger projects
• The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use
• Set includes 8 essential chisels: 3/16-Inch parting tool, 5/8-Inch spear scraper, 1-Inch skew chisel, 5/8-Inch skew chisel, 5/8-Inch round nose scraper, 1/2-Inch bowl gouge, 3/4-Inch spindle gouge, 7/8-Inch roughing gouge
• Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box
• Super value for all turners

Available at Amazon Check Price Now!

Related Products

• Big Horn 19053 8-Inch Caliper Set, 3-Piece
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center

Customer Reviews

*** Product Information and Prices Stored: Jul 01, 2012 04:45:03

My Links : Band Saws Woodworking Tools home improvement Circular Saws Woodworking Tools

How to Carve Bone

The use of bone goes back to the Old Stone Age where early man made use of bones to carve jewelry, tools, weapons, needles and other utilities/ figurines etcetera. Bone has been the most treasured forms of carvings since they are intricate, flawless and nothing in comparison to even statues made from granite.

Before you begin to carve a bone, you need to have inevitable items at hand. Here is a look at the things that are needed to carve bone:

Chisels Hand Tools

a. Animal Bone.
b. Chisels used for engraving.
c. A Scraper.
d. Knife meant for etching.
e. Mat made from leather.
f. Coping saw.
g. Sandpaper for filing.
h. Dremel tool or a covenant hand drill.
i. A course triangle and a round course file.
j. Protection for the eye and a mask preferably.

How to Carve Bone

Best Price Stanley 16-294 1-3/4-Inch X 8-1/2-Inch Masons Chisel

Stanley 16-294 1-3/4-Inch X 8-1/2-Inch Masons Chisel Feature

• Used for cutting and splitting hard stone, brick and concrete
• Limited Lifetime Warranty

Stanley 16-294 1-3/4-Inch X 8-1/2-Inch Masons Chisel Overview

16-294 Features: -Cutting edge is hardened to 52-58 HRC and is ground to a precise angle for efficient cutting and durability.-Striking edge hardened to 42 HRC and has chamfered edges to help resist chipping.-Used for cutting and splitting hard stone, brick and concrete.-1-3/4''.-Carded. Construction: -One-piece construction forged from chrome vanadium steel for strength and durability. Color/Finish: -Powder coated finish for durability.-Yellow high-visibility finish.

Available at Amazon Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jun 27, 2012 10:30:08

The first thing before you decide to start the bone carving is to trace a create on paper; since you can do assorted designs on all the sides of the bone and it is a dimensional work of art; take three separate designs for all the sides of the bone.

To get the bone ready for carving: you first have to wash and clean the bone thoroughly. Remember to wash it thoroughly devoid of any bone marrow or flesh that is stuck to it. This is leading as it will help you to carve the bone better. Soak the bone in soapy water which is nice and hot for a full day. Then take off it and let it dry. Saw it down to the requirements of your design. If you are making tiny figurines or chess pieces you many need to saw it down a little more for the intended shape and size.

Spread your leather mat on the place you intend beginning your work and keep all the required tools at hand. Using the etching knife and the gravers, moderately carve the smaller aspects of the design. This will help you get the knack and practice, by using the filing tools moderately file away at the edges and start shaping the bone to get the frame of the design. Keep repeating the course until you get the faultless create on all the sides of the bone. After the create is complete; use sandpaper and sand down your bone. Now you are all set to display your creation and this can be an ideal hobby for the children on vacation or a great gifting solution.

How to Carve Bone

Visit : home improvement TIG Welding Equipment Power Tools Lathes Dust Collectors & Air Cleaners

studying the Way to Engrave Gifts

If you want to make engraved gifts, you can do it in any materials that consist of jewelry, glass, stone, wood, metal, or other products. In this case, just fit in the tools of engraving and the skill you have in using the tools. Indeed, engraved gifts are a unique gift among many gifts you can choose for your best friend wedding. Even, by them, you can express your care. That is why, they can be a overwhelming gift.

The things you will need in engraving gifts consist of ventilation system, hand tools (such as hammers, engraving pen, and chisels), laser engraver, computer, pressurized-air tools, designs of templates, and photo software.

Chisels Hand Tools

In engraving gifts, you should focus on the area of work in which you will engrave. If you want, you can add a ventilation system. Then, it is recommended for you to match the gift with what your best friend likes. Indeed, engraving gifts are like a occasion for you to make your gifts extra and personal.

studying the Way to Engrave Gifts

Best Price Stanley 16-050 Sharpening System

Stanley 16-050 Sharpening System Feature

• Sharpening kit designed for effective sharpening of chisels and plane irons
• Designed with all components necessary for achieving accurate, precise sharpening
• Compatible with chisel blades and plane irons from 1/4-to-2-3/4-inches
• Includes oil stone, honing guide, white oil, and user instructions
• Limited lifetime warranty

Stanley 16-050 Sharpening System Overview

Complete system for accurate and precise sharpening of cutting edges. Kit contains: Honing guide, oilstone (8'' x 2'' aluminum oxide grit sharpening stone, double sided with fine and medium grade), and white oil (for use with oilstone, nonflammable, nontoxic). Features angle setting gauge with preset markings at 25, 30, and 35 for ease of set up. Suitable for use with all chisel blades and plane irons from 1/4'' to 2 3/4'' (4mm to 60mm).

Stanley 16-050 Sharpening System Specifications

The Stanley Sharpening System provides all the necessary components for accurate and precise sharpening of chisel blades and plane irons. The kit includes: a honing guide; an 8-by-2-inch aluminum oxide grit sharpening stone, double-sided with fine and medium grade; and non-flammable, non-toxic white oil for use with the oilstone. It also includes instructions to achieve a precise, sharp edge that is square to the blade. This kit is compatible with all chisel blades and plane irons from 1/4 inch to 2-3/4 inches (4mm-60mm). It is covered by a limited lifetime warranty.

Available at Amazon Check Price Now!

Related Products

• Robert Larson 800-1800 Honing Guide
• Stanley 12-220 Block Plane
• Stanley 12-951 SpokeShave with Flat Base
• Stanley 12-960 Contractor Grade Low Angle Plane
• Stanley 12-101 Small Trimming Plane

Customer Reviews

*** Product Information and Prices Stored: Jun 25, 2012 16:45:06

Related to the tools of engraving, the use of hand tools is recommended. In engraving, the chisels are beneficial to make separate textures and lines, while an engraving pen has similar function with a hammer, but unfortunately it reduces your creativity in manufacture separate lines.

Meanwhile, machines for pressurized-air engraving are beneficial to engrave the gift surface. To make this engine function, regulate the flow of air by using a palm control or a foot pedal. Besides using hand tools, you can also use laser engravers in engraving gifts. To make the image you will engrave, you should use a photo software and computer. Retort the laser engraver wattage first to know the materials you use in engraving.

studying the Way to Engrave Gifts

See Also : home improvement Band Saws Woodworking Tools Hammer Drills Power Tools

TD Industrial 12 Pc Wood Carving Woodworking Chisel Set Hand Tool

Best Price TD Industrial 12 Pc Wood Carving Woodworking Chisel Set Hand Tool

TD Industrial 12 Pc Wood Carving Woodworking Chisel Set Hand Tool Feature

• 12 Piece Set
• High Carbon Steel Construction
• For Use with Wooden Mallet
• Great for Wax and Clay
• Wood Case

TD Industrial 12 Pc Wood Carving Woodworking Chisel Set Hand Tool Overview

A high carbon steel 12 piece Carving Chisel Set from TD Industrial. This high carbon steel woodworking carving chisel set is for use with a wooden mallet. Works great for wood, wax and clay. This set features: 1/2" Gouge, 3/8" Parting Tool, 5/8" Gouge, 1/4"-Double Face Skew, 1/4" Spoon Chisel, 1/4" Round Point, 1/4" Skew, 1/4" Spear Point, 1/4"-Hollow Point, 1/4" Straight Chisel, 1/2" Straight Chisel, Chisel size: 8 1/2", Includes custom wood storage case.

Available at Amazon Check Price Now!

Related Products

• The Beginner's Handbook of Woodcarving: With Project Patterns for Line Carving, Relief Carving, Carving in the Round, and Bird Carving
• FINGER GUARD
• SE 8" - 12 Pc Professional Wood Carving Chisels
• LEATHER THUMB GUARD MEDIUM
• The Complete Book of Woodcarving: Everything You Need to Know to Master the Craft

Customer Reviews

*** Product Information and Prices Stored: Jun 16, 2012 23:30:04

Recommend : home improvement Blowguns Air Tools Air Compressors Staplers & Tackers Hand Tools

Irwin M444SB6N Blue Chip Bevel Edge Woodworking Chisel Set, 6-Piece (Box set)

#1 Sale Now Irwin M444SB6N Blue Chip Bevel Edge Woodworking Chisel Set, 6-Piece (Box set)

Irwin M444SB6N Blue Chip Bevel Edge Woodworking Chisel Set, 6-Piece (Box set) Feature

• Long blade and polypropylene handle for increased leverage
• Best suited for hand or mallet work
• High carbon solid-forged steel blade for maximum edge retention
• Contains 1/4-Inch, 3/8-Inch, 1/2-Inch, 3/4-Inch, 1-Inch, and 1 1/4-inch in box

Irwin M444SB6N Blue Chip Bevel Edge Woodworking Chisel Set, 6-Piece (Box set) Overview

These bevel-edged chisels are hardened and tempered under controlled conditions and accurately ground for precise control. Handle is square with rounded corners for comfort and to prevent rolling. Chisel handles are made of indestructible polypropylene to withstand heavy mallet and hammer blows. Overall lengths 9-3/4"-11", blade lengths 3-1/2" to 4-1/4". These tools are factory ground and require honing before use. Boxed 6-piece set includes 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" widths.

Available at Amazon Check Price Now!

Related Products

• Robert Larson 800-1800 Honing Guide
• Woodstock SteeleX D1130 1000 Grit and 6000 Grit Japanese Waterstone
• Crown 106 20-Oz Beechwood Mallet, 4-1/2-Inch
• Empire Level E250 12-Inch Heavy Duty Professional Combination Square w/Etched Stainless Steel Blade and True BlueR Vial
• Stanley 12-220 Block Plane

Customer Reviews

*** Product Information and Prices Stored: Jun 15, 2012 02:06:26

My Links : home improvement Band Saws Woodworking Tools Spot welding Equipment Power Tools Collated Staples Air Tools

Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard

#1 Sale Now Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard

Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard Feature

• Used for cutting and splitting hard stone, brick and concrete
• Limited Lifetime Warranty

Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard Overview

Stanley 16-334 2-3/4" X 8-1/2" FatMax Mason's Chisel with Bi-Material Hand GuardStanley is proud of its reputation for excellence. They are dedicated to continually testing, designing and improving their products to ensure quality and maximum function. Maintaining their standing of being the world's best at what they do is important to them and what you expect from a name like Stanley. Stanley 16-334 2-3/4" X 8-1/2" FatMax Mason's Chisel with Bi-Material Hand Guard Features:Used for cutting and splitting hard stone, brick and concrete; Length : 8-1/2"; Cutting Edge : 2-3/4"; Used for cutting and splitting hard stone, brick and concrete; Carded; 2-3/4"

Available at Amazon Check Price Now!

Related Products

• Stanley 16-328 4-Inch X 8-1/2-Inch FatMax Brick Sets with Bi-Material Handle Guard
• Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard
• Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard
• Stanley 16-298 3 Piece Cold Chisel Kit
• Stanley 54-022 FatMax AntiVibe Brick Hammer

Customer Reviews

*** Product Information and Prices Stored: Jun 10, 2012 12:04:19

Related : home improvement Band Saws Woodworking Tools Jig Saws Power Woodworking Tools Saws Air Tools power and handtools

Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard

#1 Sale Now Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard

Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard Feature

• For Cutting / Shaping Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminium, Bolts, Nuts & Rivets
• Limited Lifetime Warranty

Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard Overview

Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand GuardStanley is proud of its reputation for excellence. They are dedicated to continually testing, designing and improving their products to ensure quality and maximum function. Maintaining their standing of being the world's best at what they do is important to them and what you expect from a name like Stanley. Stanley 16-332 FatMax Cold Chisel with Bi-Material Hand Guard Features:; For Cutting / Shaping Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminium, Bolts, Nuts & Rivets; Length: 12"; Cutting Edge: 1"; Used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets; 1" cutting edge; 12" length; Carded

Available at Amazon Check Price Now!

Related Products

• Stanley 16-334 2-3/4-Inch X 8-1/2-Inch FatMax Masons Chisel with Bi-Material Hand Guard
• Stanley 16-329 3/4-Inch X 12-Inch FatMax Concrete Chisel with Bi-Material Hand Guard
• Stanley 16-298 3 Piece Cold Chisel Kit
• Stanley 54-022 FatMax AntiVibe Brick Hammer
• Stanley 16-299 12 Piece Punch & Chisel Kit

Customer Reviews

*** Product Information and Prices Stored: Jun 09, 2012 15:49:09

Friends Link : home improvement Band Saws Woodworking Tools Flashlights Hand Tools power and handtools Power Sprayers Air Tools