Carving a Stone House Sign

If you would like to try carving your own stone house sign and you have no old experience, you may find some of the tips below will help.
First choose a favorable stone, unless you are experienced at carving, select a soft stone such as Bath stone.

You will need at least one good chisel, a quarter inch steel splitter will do the job. A steel club hammer, as small as possible, a right edge or quadrilateral and a scriber, a sharpened masonry nail will do, and a Riffle file would also be very handy.
A riffle file is a small metal rasp with two shaped heads. If you don't have a riffle, use a small fine rasp.

Chisels Hand Tools

Tips:

Carving a Stone House Sign

Best Price SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch

SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Feature

• Eleven 9-Inch chisels, hardened high-carbon steel blades with rubberized soft-grip handles
• Blade styles include wide and narrow flat, rounded, concave, corner, straight and offset
• Dual-grit aluminum oxide whetstone plus round, flat and triangular silicon carbide sharpening stones
• Rugged poly-canvas case with elastic pockets to keep organized and protected; 12-Inch hardwood striker

SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Overview

16Pc Professional Quality Wood Carving Chisel Set 11- 8.5-Inch High Carbon Steel Wood Chisels with High Impact Plastic Handles 3- 6 by 1/2-Inch Silicon Carbide Round, 3 Square, Rectangular Stone 6-Inch Combination Sharpening Stone Wooden Sticker Heavy Duty Carrying Pouch Included.

Available at Amazon Check Price Now!

Related Products

• FINGER GUARD
• SE 7718WC Professional Wood Carving Chils with Cloth Pouch-18 Piece
• The Beginner's Handbook of Woodcarving: With Project Patterns for Line Carving, Relief Carving, Carving in the Round, and Bird Carving
• LEATHER THUMB GUARD MEDIUM
• LEATHER THUMB GUARD LARGE

Customer Reviews

*** Product Information and Prices Stored: Jul 05, 2012 03:45:06

Search in your local road market for second hand tools, it may save you money.

If you find a small club hammer with a short cope and a hollow worn into the side of the head, rejoice, you have found an former stone carvers hammer!

Cut down the cope of an commonplace club hammer to about six inches, this will make it much easier to cope and control.
When using the hammer with a chisel, strike with the side of the head, this will help you keep greater operate of the both the hammer and the chisel, use the thumb pressed against the head or cope to help keep the hammer steady.

To hold the chisel correctly first lay the chisel across the lowest joints of the fingers and fold the fingers over to grip the chisel, do not clench your fist, the thumb rests on the shaft of the chisel to help with control.
Keep both your elbows tight into your side and not waiving around in space, this will help with control, and also forestall shoulder ache. If you find this difficult, try to hold a pencil under your armpit while working!

To make a small scriber or point try using a sharpened Oboe masonry nail.

I advise trying to carve out a sign in relief, that is where the carving stands proud of the background, rather like a cameo. Leave a raised border around the edge to sell out the whole of work.
Choose a style of font that suits your house or create of house sign. However, I advise not to use a font with thin or narrow sections, as these can be brittle when carving. You could consist of a motif , for instance a flower or leaf pattern but do keep it uncomplicated for your first effort.

Mark out the layout of your house sign or whole in pencil. When you are happy about the create use the scriber and right edge to scribe in deeply all of the right lines in the design, even the right lines on the lettering or numbers, then pencil in the scribed lines. When you are carving you will find the edge of the chisel can be lodged into the scribed lines for greater accuracy.

One of the most difficult problems to overcome is how to hold the piece of work steady while carving. To solve this qoute fix the sign to a larger slab of stone or paving slab with plaster of Paris. When the job is done plainly tap a chisel into joint between the sign and the backing, it will just pop off!

The first task with all stone work is to take off the waste material. Keep away from the lettering or border, take off as much of the waste as inherent before tackling the prominent bits. Approach the edges of the letters gradually, don't try to do too much too quickly. Carving stone is verily a process of shaving off layers until the required shape is achieved.

To halt off, sand down with a base grit wet and dry polisher paper, used dry not wet.

Good luck, and please let me know how you get on, you can sense me straight through my website

Carving a Stone House Sign

Friends Link : Band Saws Woodworking Tools home improvement Hammer Drills Power Tools Rotary Hammers Lathes