Sunday, July 8, 2012

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set

Best Price Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set


Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set Feature

  • Black polypropylene handle resists deformation. Includes: 16-153, 16-155, 16-157
  • Limited Lifetime Warranty
  • Heat tempered steel blades, lacquer-coated to prevent rust
  • Blades uniformly hardened for full length use

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set Overview

"STANLEY" WOOD CHISEL SET CONTAIN3 Piece Wood Chisel Set Contains 1/2" (12MM), 3/4" (18MM) & 1" (25MM) ChiselsFeatures Full SizeShock Absorbing Handles With A No Roll FeatureDurable Precision Ground Cutting EdgesHeat Tempered Steel BladesLacquer Coated To Resist RustBolster Blade Washer To Distribute LoadAdded For StrengthOverall Length Of Chisels Is 7-3/4" (199MM)Carded

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jul 09, 2012 00:00:07

Tags : Band Saws Woodworking Tools home improvement Screwdrivers Air Tools Measuring & Layout Tools Hand Tools

Thursday, July 5, 2012

Carving a Stone House Sign

If you would like to try carving your own stone house sign and you have no old experience, you may find some of the tips below will help.
First choose a favorable stone, unless you are experienced at carving, select a soft stone such as Bath stone.

You will need at least one good chisel, a quarter inch steel splitter will do the job. A steel club hammer, as small as possible, a right edge or quadrilateral and a scriber, a sharpened masonry nail will do, and a Riffle file would also be very handy.
A riffle file is a small metal rasp with two shaped heads. If you don't have a riffle, use a small fine rasp.

Chisels Hand Tools

Tips:

Carving a Stone House Sign

Best Price SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch


SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Feature

  • Eleven 9-Inch chisels, hardened high-carbon steel blades with rubberized soft-grip handles
  • Blade styles include wide and narrow flat, rounded, concave, corner, straight and offset
  • Dual-grit aluminum oxide whetstone plus round, flat and triangular silicon carbide sharpening stones
  • Rugged poly-canvas case with elastic pockets to keep organized and protected; 12-Inch hardwood striker

SE 7716WC 16-Piece Professional Wood Carving Chils with Cloth Pouch Overview

16Pc Professional Quality Wood Carving Chisel Set 11- 8.5-Inch High Carbon Steel Wood Chisels with High Impact Plastic Handles 3- 6 by 1/2-Inch Silicon Carbide Round, 3 Square, Rectangular Stone 6-Inch Combination Sharpening Stone Wooden Sticker Heavy Duty Carrying Pouch Included.

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jul 05, 2012 03:45:06

Search in your local road market for second hand tools, it may save you money.

If you find a small club hammer with a short cope and a hollow worn into the side of the head, rejoice, you have found an former stone carvers hammer!

Cut down the cope of an commonplace club hammer to about six inches, this will make it much easier to cope and control.
When using the hammer with a chisel, strike with the side of the head, this will help you keep greater operate of the both the hammer and the chisel, use the thumb pressed against the head or cope to help keep the hammer steady.

To hold the chisel correctly first lay the chisel across the lowest joints of the fingers and fold the fingers over to grip the chisel, do not clench your fist, the thumb rests on the shaft of the chisel to help with control.
Keep both your elbows tight into your side and not waiving around in space, this will help with control, and also forestall shoulder ache. If you find this difficult, try to hold a pencil under your armpit while working!

To make a small scriber or point try using a sharpened Oboe masonry nail.

I advise trying to carve out a sign in relief, that is where the carving stands proud of the background, rather like a cameo. Leave a raised border around the edge to sell out the whole of work.
Choose a style of font that suits your house or create of house sign. However, I advise not to use a font with thin or narrow sections, as these can be brittle when carving. You could consist of a motif , for instance a flower or leaf pattern but do keep it uncomplicated for your first effort.

Mark out the layout of your house sign or whole in pencil. When you are happy about the create use the scriber and right edge to scribe in deeply all of the right lines in the design, even the right lines on the lettering or numbers, then pencil in the scribed lines. When you are carving you will find the edge of the chisel can be lodged into the scribed lines for greater accuracy.

One of the most difficult problems to overcome is how to hold the piece of work steady while carving. To solve this qoute fix the sign to a larger slab of stone or paving slab with plaster of Paris. When the job is done plainly tap a chisel into joint between the sign and the backing, it will just pop off!

The first task with all stone work is to take off the waste material. Keep away from the lettering or border, take off as much of the waste as inherent before tackling the prominent bits. Approach the edges of the letters gradually, don't try to do too much too quickly. Carving stone is verily a process of shaving off layers until the required shape is achieved.

To halt off, sand down with a base grit wet and dry polisher paper, used dry not wet.

Good luck, and please let me know how you get on, you can sense me straight through my website

Carving a Stone House Sign

Friends Link : Band Saws Woodworking Tools home improvement Hammer Drills Power Tools Rotary Hammers Lathes

Sunday, July 1, 2012

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

Best Price PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece


PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece Feature

  • Ideal kit for turning small pens, spindles, bowls and larger projects
  • The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use
  • Set includes 8 essential chisels: 3/16-Inch parting tool, 5/8-Inch spear scraper, 1-Inch skew chisel, 5/8-Inch skew chisel, 5/8-Inch round nose scraper, 1/2-Inch bowl gouge, 3/4-Inch spindle gouge, 7/8-Inch roughing gouge
  • Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box
  • Super value for all turners

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jul 01, 2012 04:45:03

My Links : Band Saws Woodworking Tools home improvement Circular Saws Woodworking Tools